Discontinued 已 停 產
Philips
SPC900NC CCD Web Cam
USB 2.0 Interface |
d:VLounge : Advancd . dd vieo to : MSN Messenger, Yahoo!
Messenger, A |
Meade
LPI Lunar & Planetary Imager # The Meade Lunar Planetary Imager (LPI) combines the power of an electronic astronomical imager/autoguider with the simplicity of a webcam. # Included AutoStar Suite software allows you to control all AutoStar functions from your PC, including automatic slewing to a planetarium display on your screen. # Choose from over 19 million objects in AutoStar Suite's catalogs.
* Exposure - This is the exposure time in seconds (from .001 to 16 seconds), the up and down spin buttons adjust the exposure up and down by .5 f/stop. * Gain and Offset - Are like contrast and brightness on a TV. These controls are sent directly to the camera. * Histogram - Displays a histogram of the image in the Live tab. It uses a monochrome converted image which is an average of the RGB of each pixel. * Stretch Controls - The sliders below the histogram control the stretch of the image. The top one is black and the bottom one is white. The numbers below the sliders are the stretch values. The left one is black the right one is white. |
* LOG Checkbox - This makes the histogram response log. * ROI Checkbox - Makes a histogram in the region of interest (ROI) of the red rectangle in the Live display area drawn by the user. * Magic Eye Focus - This displays a graphical representation of the focus. The two orange triangles grow together to indicate better focus. The red lines indicate the maximum obtained. * Avg Checkbox - This will average the last 5 focus values to smooth out the noise in the image. * Reset - This will reset the red max indicators of the Magic Eye Focus tool. * Start - This will start co-adding images and continuously display the current image in the Live tab and the co-added image in a new tab with the filename as the tab. The Min Quality, Evaluation Count, Object Name, and filter selection will be used for this image. The start button will be relabeled "Stop". When Stop is pressed the co-added image will be saved as the file type selected and in the "Image Folder" under the Object Name. If there is already a file with this name then a number will be suffixed to the name. * Min Quality - This selects the minimum quality that is acceptable to co-add an image. * Evaluation Count - This is the number of images skipped when Start is pressed to determine a quality range. * Object Name - This is the filename that will be used when the Stop button is pressed. * Kernel Filter - This will insert the selected kernel filter in the image stream. When co-adding the image, the filter is applied after the co-add but is only used for display. It is applied again when the image is saved such that it is only applied once to the co-added image. * Images Status - This displays the number of co added images. |
Autostar
Suite Software is your complete digital astronomy solution for your Meade
telescope! Now take advantage of these powerful features of Autostar Suite
with your Autostar-equipped Meade telescope:
* Select objects from the planetarium display and have your telescope automatically slew to those objects. * Control all Autostar functions from your PC. * Talking Telescope software translates Autostar text to synthesized speech through your PC speaker. * Remote telescope control over the Internet. * Includes the Lunar Planetary Imager (LPI) that will allow you to achieve great results the first time on the Moon, planets, brighter deep-sky objects, and terrestrial targets. * Point and click the planetarium display to create custom tours of the objects of your choice with your custom text that can be uploaded into the Autostar controller. There are over 19 million objects to choose from in the Autostar Suite's catalogs. Here are some of the tools and features that control the star map display: * Enable or disable the Hubble Guide Star Catalog. * Set the Viewpoint to go to the current zenith or any R.A. and Dec. coordinate. * Choose any object by catalog name or number. * Enable or disable custom catalogs. You can also add new catalogs. * Set Magnitude Limits. * Flip the star map for correct orientation as you observe it through the telescope. * Zoom the star map display from 180°, down to tiny fractions of an arc second.
|
IR Blocking Filter for ToUcam/ CCD - 1.25" High quality filter specially designed for use with ToUcam & CCD photography
* Extremely steep cuttoff at 675nm * Full H-alpha (656nm) transmission * IR- blocking up to 1200nm * Completly resistant against high humidity and scratches
* Highest optical quality on the market |
紅外線吸收濾鏡 HKD150 only **STOCK AVAILABLE 現貨供應** |
Suberb Mars images taken with ToUcam |
-----------------------------------
Dome atop Tai Mo Shan at 11km away (ToUcam Pro II, F.L.2160mm) |
A wall at 800m away (ToUcam Pro II, F.L.2160mm) |
-
|
------------------------------------------------------------------------------
_________________________________________________